Refer to Diagnostic class (standard): 3
|
Default reaction |
||
|---|---|---|
|
BD2 |
BD2 |
|
|
BP |
BP |
This diagnostic message is triggered if an external braking resistor is configured but not connected.
|
Cause |
Solution |
|---|---|
|
The external braking resistor is not connected to the device. |
Connect the braking resistor. |
|
The internal braking resistor shall be used but the parameter ExternalBrakingResistorEnableSet is set to |
Set the parameter ExternalBrakingResistorEnableSet to |
|
The external braking resistor is inoperable. |
Replace the braking resistor. |