AutoRun

General

Type	ER
Devices supporting the parameter	PacDrive LMC x00C, PacDrive LMC x01C
Traceable:	Yes

Functional Description

Automatic program start after creating the control voltage.

NOTE: This parameter is a reset parameter (ER). Changes will take effect only after a reset of the controller. To save the values as initialization values after changing the value of the parameter via online change or in the application, the function FC_SysSaveParameter has to be called.

Presetting

The presetting for AutoRun = FALSE.

Commissioning

While preparing the application and during commissioning, AutoRun must be set to false.

Regular Machine Operation

WARNING
	UNINTENDED EQUIPMENT OPERATION Use appropriate safety interlocks where personnel and/or equipment hazards exist. Failure to follow these instructions can result in death, serious injury, or equipment damage.

During regular machine operation the parameter AutoRun = TRUE. Otherwise the start of the application can only take place via Logic Builder.

Value	Data type	Meaning
no / 0	BOOL	No automatic program start
yes / 1	BOOL	Automatic program start after booting the PacDrive controller