AutoDischarge

General

Type	ES
Offline editable	Yes
Devices supporting the parameter	Lexium LXM52 Drive, Lexium LXM52 Linear Drive, Lexium LXM62 Power Supply
Traceable	Yes

Functional Description

Enables and disables the automatic discharge of the DC bus.

Value	Data type	Meaning
Disable automatic discharge / 0	BOOL	The DC bus is not discharged automatically.
Enable automatic discharge / 1	BOOL	If the Sercos bus is moved to phase 0, then the DC bus is automatically discharged. The discharge is stopped after 10 s at the latest (default value).

NOTE: The parameter value is transferred from the master to the slave via the parameter channel of the Sercos at every access. Typically, this takes about 10 ms. However, times up to 1 s can occur if there is a lot of data transferred on the parameter channel.