ET_DiagExt

ET_DiagExt - General Information

Overview

Type:	List type
Available as of:	V1.0.0.0

Description

The enumeration ET_DiagExt specifies the POU-specific diagnostic and status messages.

Enumeration Elements

Name	Value	Description
Ok	0	Proceeding normally, satisfactory or under control, or other affirmative acknowledgement.
Disabled	1	Disabled.
Initializing	2	Initializing.
WaitForStart	3	Wait for Start.
Working	4	In process.
WaitUntilStopped	5	Wait until drive has been stopped.
Disabling	6	Disabling.
DriveInvalid	8	Drive is invalid.
FoilWidthRange	10	FoilWidth is outside of the valid range.
CoilRadiusRange	11	CoilRadius is outside of the valid range.
FoilDensityRange	12	FoilDensity is outside of the valid range.
NumberOfAsyncTasksRange	13	NumberOfAsyncTasks is outside of the valid range.
UnexpectedFeedback	14	Feedback is not expected.
MaxNumberOfReusableObjectsExceeded	15	Maximum number of reusable objects has been exceeded.
MeasurementPeriodRange	16	MeausrementPeriod is outside of the valid range.
AccelerationRange	18	Acceleration is outside of the valid range.
DecelerationRange	19	Deceleration is outside of the valid range.
VelocityRange	20	Velocity is outside of the valid range.
JerkRange	21	Jerk is outside of the valid range.
SlaveMasterRatioRange	22	SlaveMasterRatio is outside of the valid range.
InterfaceInvalid	23	Interface is invalid.
UnexpectedState	25	State is unintended.
ParentInvalid	26	Parent is invalid.
ParentNotRegistered	27	Parent is not registered.
MaxNumberOfLoggerPointsExceeded	28	Maximum number of logger points is exceeded.
StartMovement	34	Start movement is executed.
ParameterInvalid	35	Parameter is invalid.
SensorValueMinMaxInvalid	36	SersorValueMin and SensorValueMax are invalid.
ApplicationValueMinMaxInvalid	37	ApplicationValueMin and ApplicationValueMax are invalid.
ApplicationLevelRefRange	38	ApplicationLevelRef is outside of the valid range.
AnalogInputInvalid	39	AnalogInput is invalid.
InvalidController	40	Controller is invalid.
DriveNotReady	41	Drive is not ready.
RadiusRange	44	Radius is outside of the valid range.
MasterInvalid	45	Master is invalid.
MaxStartDistanceRange	46	MaxStartDistance is outside of the valid range.
MaxStartDistanceReached	47	Maximum start distance is reached.
MiddlePosRangeRange	48	MiddlePosRange is outside of the valid range.
RadiusInvalid	50	Radius is invalid.
PreControllerModeInvalid	51	PreControllerMode is invalid.
ControllerModeInvalid	52	ControllerMode is invalid.
StartMovementModeInvalid	53	StartMovementMode is invalid.
UnexpectedDiagExt	54	DiagExt was not expected.
MasterStandStill	55	Master is at stand still.
MaxZoneRange	56	MaxZone is outside of the valid range.
MinZoneRange	57	MinZone is outside of the valid range.
FeedbackMaxReached	58	Maximum feedback is reached.
FeedbackMinReached	59	Minimum feedback is reached.
StartFillLevelRange	62	StartFillLevel is outside of the valid range.
DirectMasterInvalid	63	DirectMaster is invalid.
DisturbanceValueRange	64	DisturbanceValue is outside of the valid range.
JLoadGainRange	65	JLoadGain is outside of the valid range.
StartThresholdRange	67	StartThreshold is outside of the valid range.
CommunicationNotPossible	68	Communication is not possible.
ParameterNotConfigured	69	Parameter is not configured.
SignalOriginInvalid	70	SignalOrigin is invalid.
TimeOut	71	A TimeOut has occured.