|
Type |
EF |
|
Devices supporting the parameter |
PacDrive LMC x00C, PacDrive LMC x01C |
|
Traceable |
No |
This parameter has three possible states that are each dependent on the state of the LicenseUpdateMode parameter.
|
Value |
Data type |
Meaning |
|---|---|---|
|
off / 0 |
DINT |
The parameter has no meaning and is blocked to input. |
|
request key / 1 |
DINT |
In this state, LicenseUpdateString contains the request key that has to be forwarded to to request license points. |
|
authorization key / 2 |
DINT |
For this state, LicenseUpdateString is used to enter the authorization key. |
State of The LicenseUpdate Parameter
After you enter the authorization key, you must restart the system. While booting, the system checks whether the key is correct. The new number of points is available after the system has booted. If the key has errors, the previous number of points is retained and you are again prompted to enter a correct key. To obtain the authorization key, follow these five steps:
1.Use to create a request key
2.Send the request key to Schneider Electric
3.Receive the relevant authorization key
4.Enter the authorization key-in
5.Reset the PacDrive controller
